Composite Materials and Technology Center, MUT, Tehran, Iran.
10.7508/ijnd.2013.02.005
Abstract
In this paper, the modified Euler-Bernoulli beam model is presented to examine the influence of surface elasticity and residual surface tension on the critical force of axial buckling of nanotubes in the presence of rotary inertia. An explicit solution is derived for the buckling loads of microscaled Euler beams considering surface effects. The size-dependent buckling behavior of the nanotube due to surface effects is well elucidated in the obtained solutions. The critical forces are evaluated for axial buckling of cantilever beams. The results are compared with those corresponding to the classical beam model. The influences of the surface effects on the critical forces are discussed in detail.
Jam, J. E., & Samaei, A. T. (2013). Buckling of nanotubes under compression considering surface effects. International Journal of Nano Dimension, 4(2), 131-134. doi: 10.7508/ijnd.2013.02.005
MLA
J. E. Jam; A. T. Samaei. "Buckling of nanotubes under compression considering surface effects". International Journal of Nano Dimension, 4, 2, 2013, 131-134. doi: 10.7508/ijnd.2013.02.005
HARVARD
Jam, J. E., Samaei, A. T. (2013). 'Buckling of nanotubes under compression considering surface effects', International Journal of Nano Dimension, 4(2), pp. 131-134. doi: 10.7508/ijnd.2013.02.005
VANCOUVER
Jam, J. E., Samaei, A. T. Buckling of nanotubes under compression considering surface effects. International Journal of Nano Dimension, 2013; 4(2): 131-134. doi: 10.7508/ijnd.2013.02.005
)
