Author Index

A

  • Abbasi Rostami, A. Wavelength and polarization variations of InAs/GaAs quantum dots emission at liquid Helium temperature via microphotoluminescence spectroscopy [Volume 3, Issue 4, 2013, Pages 333-336]
  • Abdollahi, M. Time-dependent analysis of carrier density and potential energy in spherical centered defect InGaAs/AlGaAs quantum dot (SCDQD) [Volume 3, Issue 1, 2012, Pages 35-42]
  • Abdollahi, M. The effect of first order magnetic field in a GaAs/AlAs spherical quantum dot with hydrogenic impurity [Volume 3, Issue 2, 2012, Pages 149-154]
  • Abedi, L. Characterization of wax using potential energy and nanocalculation [Volume 3, Issue 3, 2013, Pages 249-253]
  • Abedini Khorrami, S. The effect of molar ratio on structural and magnetic properties of BaFe12O19 nanoparticles prepared by sol-gel auto-combustion method [Volume 3, Issue 3, 2013, Pages 191-197]
  • Abedini Khorrami, S. Photocatalytic properties of ZrO2 nanoparticles in removal of nitrophenol from aquatic solution [Volume 3, Issue 3, 2013, Pages 235-240]
  • Ab Ghani, S. Electrocatalytic determination of free glycerol in biodiesel at nano nickel modified graphite electrode [Volume 3, Issue 3, 2013, Pages 241-247]
  • Abu El-hassan, Kh. Compressive strength of Portland cement pastes and mortars containing Cu-Zn nano-ferrite [Volume 3, Issue 2, 2012, Pages 91-100]
  • Aezami, M. Characterization of wax using potential energy and nanocalculation [Volume 3, Issue 3, 2013, Pages 249-253]
  • Ahmadi, S. Wavelength and polarization variations of InAs/GaAs quantum dots emission at liquid Helium temperature via microphotoluminescence spectroscopy [Volume 3, Issue 4, 2013, Pages 333-336]
  • Akhavan, K. Synthesis of hydroxyapatite nanoparticles trough polyelectrolyte-modified microemulsions [Volume 3, Issue 2, 2012, Pages 121-125]
  • Allahgholi Ghasri, M.R. Electrocatalytic determination of free glycerol in biodiesel at nano nickel modified graphite electrode [Volume 3, Issue 3, 2013, Pages 241-247]
  • Andalibi, K. Investigation of the effects of nano-silica on the properties of concrete in comparison with micro-silica [Volume 3, Issue 4, 2013, Pages 321-328]
  • Anuratha, V. Antimicrobial activity and characterization of biosynthesized silver nanoparticles from Anisochilus carnosus [Volume 3, Issue 4, 2013, Pages 255-262]
  • Apte, P. R. A mechanical micro molecular mass sensor [Volume 3, Issue 2, 2012, Pages 169-174]
  • Arasteh, M. Berry curvature and energy bands of graphene [Volume 3, Issue 4, 2013, Pages 329-332]
  • Asadi, S. Simulation of nanodroplet impact on a solid surface [Volume 3, Issue 1, 2012, Pages 19-26]
  • Assi, N. Photocatalytic properties of ZrO2 nanoparticles in removal of nitrophenol from aquatic solution [Volume 3, Issue 3, 2013, Pages 235-240]
  • Ayatollahi, S. Sh. Characterization of wax using potential energy and nanocalculation [Volume 3, Issue 3, 2013, Pages 249-253]

B

  • Baghbani Rizi, H. The effect of first order magnetic field in a GaAs/AlAs spherical quantum dot with hydrogenic impurity [Volume 3, Issue 2, 2012, Pages 149-154]
  • Bahari, A. Structure of Lattice Strain and effect of sol concentration on the characterization of TiO2-CuO-SiO2 nanoparticles [Volume 3, Issue 2, 2012, Pages 127-139]
  • Bakhtiari, H. Synthesis and characterization of BaFe12O19/MgFe2O4 nanocomposite powders [Volume 3, Issue 3, 2013, Pages 185-190]
  • Bakhtiari, H. The effect of molar ratio on structural and magnetic properties of BaFe12O19 nanoparticles prepared by sol-gel auto-combustion method [Volume 3, Issue 3, 2013, Pages 191-197]
  • Bakhtiarzadeh, F. Electrocatalytic determination of free glycerol in biodiesel at nano nickel modified graphite electrode [Volume 3, Issue 3, 2013, Pages 241-247]

D

  • Daraei, A. Wavelength and polarization variations of InAs/GaAs quantum dots emission at liquid Helium temperature via microphotoluminescence spectroscopy [Volume 3, Issue 4, 2013, Pages 333-336]

E

  • Elsagh, A. Synthesis, characterization and optimization of Silica nanostructures by use of structure modifiers and ultrasonication [Volume 3, Issue 1, 2012, Pages 59-67]
  • Eltabey, M. Compressive strength of Portland cement pastes and mortars containing Cu-Zn nano-ferrite [Volume 3, Issue 2, 2012, Pages 91-100]
  • Emamzadeh, M. Synthesis and characterization of BaFe12O19/MgFe2O4 nanocomposite powders [Volume 3, Issue 3, 2013, Pages 185-190]
  • Esmaeili, J. Investigation of the effects of nano-silica on the properties of concrete in comparison with micro-silica [Volume 3, Issue 4, 2013, Pages 321-328]
  • Esmaeilzadeh, M. Effects of on-center impurity on energy levels of low-lying states in concentric double quantum rings [Volume 3, Issue 1, 2012, Pages 43-51]

F

  • Farajollahpour, T. Berry curvature and energy bands of graphene [Volume 3, Issue 4, 2013, Pages 329-332]
  • Fattahi, A. Effect of Al2O3-water nanofluid on heat transfer and pressure drop in a three-dimensional microchannel [Volume 3, Issue 4, 2013, Pages 281-288]

G

  • Ghammamy, Sh. Synthesis, characterization, theoretical calculations and biological studies of nano Sodium tetrafluoroborate (III) [Volume 3, Issue 1, 2012, Pages 27-33]
  • Ghammamy, Sh. Preparation and characterization of a new halo chromate nanoparticle: Triphenylphosphonium trifluoroiodochromate (III)[P(C6H5)3H]+[CrF3I]- [Volume 3, Issue 3, 2013, Pages 227-233]
  • Ghammamy, Sh. Synthesis and characterization of Silver-Silica heterogeneous nanocomposite particles by Lithium Aluminum Hydroxide reducing method [Volume 3, Issue 4, 2013, Pages 271-279]
  • Ghammamy, Sh. Structural and optical properties of Cerium doped Calcium Fluoride nanoparticles prepared by copercipitation [Volume 3, Issue 4, 2013, Pages 289-296]
  • Gharbani, P. Adsorption of 1-chloro-4-nitrobenzene from aqueous solutions onto single-walled carbon nanotubes [Volume 3, Issue 4, 2013, Pages 263-269]
  • Ghomi Gilvaee, M. Structural and optical properties of Cerium doped Calcium Fluoride nanoparticles prepared by copercipitation [Volume 3, Issue 4, 2013, Pages 289-296]
  • Gopalakrishnan, S. Strain gradient torsional vibration analysis of micro/nano rods [Volume 3, Issue 1, 2012, Pages 1-17]

H

  • Haghighi, S. Synthesis and characterization of BaFe12O19/MgFe2O4 nanocomposite powders [Volume 3, Issue 3, 2013, Pages 185-190]
  • Hajialigol, N. Effect of Al2O3-water nanofluid on heat transfer and pressure drop in a three-dimensional microchannel [Volume 3, Issue 4, 2013, Pages 281-288]
  • Hajiemam, S. H. Wavelength and polarization variations of InAs/GaAs quantum dots emission at liquid Helium temperature via microphotoluminescence spectroscopy [Volume 3, Issue 4, 2013, Pages 333-336]
  • Hoseinkhani, H. Time-dependent analysis of carrier density and potential energy in spherical centered defect InGaAs/AlGaAs quantum dot (SCDQD) [Volume 3, Issue 1, 2012, Pages 35-42]
  • Hoseinkhani, H. The effect of first order magnetic field in a GaAs/AlAs spherical quantum dot with hydrogenic impurity [Volume 3, Issue 2, 2012, Pages 149-154]
  • Hosseini, Ali A. Evaluation of catalyst ball-milling process on growth and diameter of carbon nanotubes on iron nanoparticles [Volume 3, Issue 4, 2013, Pages 313-319]
  • Hossein Khani, P. The experimental study of reverse micellar phase in AOT/ Heptane/ (Water or aqueous) as nano template [Volume 3, Issue 1, 2012, Pages 87-89]

I

  • Islamnezhad, A. Construction of Cu2+-selective electrode and thermodynamic study of the ternary aqueous mixed electrolyte system (CuCl2, KCl, H2O) using nanocomposite-based potentiometric sensor [Volume 3, Issue 2, 2012, Pages 115-119]
  • Islampour, R. The effect of molar ratio on structural and magnetic properties of BaFe12O19 nanoparticles prepared by sol-gel auto-combustion method [Volume 3, Issue 3, 2013, Pages 191-197]

J

  • Jamialahmadi, M. Effect of polysilicon nanoparticles on enhanced oil recovery in Iranian oil reservoir [Volume 3, Issue 3, 2013, Pages 199-205]
  • Jeyakumaran, N. Influence of current density on refractive index of p-type nanocrystalline porous silicon [Volume 3, Issue 3, 2013, Pages 207-216]

K

  • Kalitha Parveen, P. Antimicrobial activity and characterization of biosynthesized silver nanoparticles from Anisochilus carnosus [Volume 3, Issue 4, 2013, Pages 255-262]
  • Kalyane, S. Synthesis, characterization and thermal study of poly (methyl methacrylate)-Co3O4 nanocomposite film [Volume 3, Issue 1, 2012, Pages 53-57]
  • Kamal, M. Compressive strength of Portland cement pastes and mortars containing Cu-Zn nano-ferrite [Volume 3, Issue 2, 2012, Pages 91-100]
  • Kardam, A. Novel nano cellulosic fibers for remediation of heavy metals from synthetic water [Volume 3, Issue 2, 2012, Pages 155-162]
  • Kazempour, A. Wavelength and polarization variations of InAs/GaAs quantum dots emission at liquid Helium temperature via microphotoluminescence spectroscopy [Volume 3, Issue 4, 2013, Pages 333-336]
  • Keysan, Sh. Synthesis, characterization, theoretical calculations and biological studies of nano Sodium tetrafluoroborate (III) [Volume 3, Issue 1, 2012, Pages 27-33]
  • Keyvan, Sh. Construction of Cu2+-selective electrode and thermodynamic study of the ternary aqueous mixed electrolyte system (CuCl2, KCl, H2O) using nanocomposite-based potentiometric sensor [Volume 3, Issue 2, 2012, Pages 115-119]
  • Khajeh Salehani, H. Effects of on-center impurity on energy levels of low-lying states in concentric double quantum rings [Volume 3, Issue 1, 2012, Pages 43-51]
  • Khanlary, M. R. Structural and optical properties of Cerium doped Calcium Fluoride nanoparticles prepared by copercipitation [Volume 3, Issue 4, 2013, Pages 289-296]
  • Khaty, N. T. Synthesis and catalytic properties of nano CuO prepared by soft chemical method [Volume 3, Issue 1, 2012, Pages 75-80]
  • Khodarahmi, M. R. Berry curvature and energy bands of graphene [Volume 3, Issue 4, 2013, Pages 329-332]
  • Khojier, K. A study on the dependence of DC electrical properties and nanostructure of Cu thin films on film thickness [Volume 3, Issue 3, 2013, Pages 217-226]
  • Khorrami, S. A. Effect of pH on nanocrystalline Co-ferrite prepared using urea and thiourea fuels by combination of sol-gel auto combustion and ultrasonic irradiation methods [Volume 3, Issue 2, 2012, Pages 141-147]
  • Kodge, A. Synthesis, characterization and thermal study of poly (methyl methacrylate)-Co3O4 nanocomposite film [Volume 3, Issue 1, 2012, Pages 53-57]
  • Kurhekar, A. S. A mechanical micro molecular mass sensor [Volume 3, Issue 2, 2012, Pages 169-174]

L

  • Lagashetty, A. Synthesis, characterization and thermal study of poly (methyl methacrylate)-Co3O4 nanocomposite film [Volume 3, Issue 1, 2012, Pages 53-57]

M

  • Madani, S. S. Effect of pH on nanocrystalline Co-ferrite prepared using urea and thiourea fuels by combination of sol-gel auto combustion and ultrasonic irradiation methods [Volume 3, Issue 2, 2012, Pages 141-147]
  • Mahmoudzadeh, G. Effect of pH on nanocrystalline Co-ferrite prepared using urea and thiourea fuels by combination of sol-gel auto combustion and ultrasonic irradiation methods [Volume 3, Issue 2, 2012, Pages 141-147]
  • Majlesara, M. H. Effects of on-center impurity on energy levels of low-lying states in concentric double quantum rings [Volume 3, Issue 1, 2012, Pages 43-51]
  • Manafi, S. Synthesis of nanocrystalline BaTiO3 ceramics via hydrothermal condition and structural characterization by HRTEM and SAED [Volume 3, Issue 2, 2012, Pages 163-168]
  • Manuchehri Naeini, Q. S. Synthesis and characterization of BaFe12O19/MgFe2O4 nanocomposite powders [Volume 3, Issue 3, 2013, Pages 185-190]
  • Mazhdi, M. The experimental study of reverse micellar phase in AOT/ Heptane/ (Water or aqueous) as nano template [Volume 3, Issue 1, 2012, Pages 87-89]
  • Mehrdad Sharif, A. A. Photocatalytic properties of ZrO2 nanoparticles in removal of nitrophenol from aquatic solution [Volume 3, Issue 3, 2013, Pages 235-240]
  • Mirzaei, M. Effects of carbon nanotubes on properties of the fluorouracil anticancer drug: DFT studies of a CNT-fluorouracil compound [Volume 3, Issue 3, 2013, Pages 175-179]
  • Mobasherpour, I. Synthesis of nanocrystalline BaTiO3 ceramics via hydrothermal condition and structural characterization by HRTEM and SAED [Volume 3, Issue 2, 2012, Pages 163-168]
  • Moradi, Sh. Effect of pH on nanocrystalline Co-ferrite prepared using urea and thiourea fuels by combination of sol-gel auto combustion and ultrasonic irradiation methods [Volume 3, Issue 2, 2012, Pages 141-147]
  • Mowla, D. Decreasing of water loss and mud cake thickness by CMC nanoparticles in mud drilling [Volume 3, Issue 2, 2012, Pages 101-104]

N

  • Narasimha, G. Virucidal properties of silver nanoparticles synthesized from white button Mushrooms (Agaricus bisporus) [Volume 3, Issue 3, 2013, Pages 181-184]
  • Narendar, S. Strain gradient torsional vibration analysis of micro/nano rods [Volume 3, Issue 1, 2012, Pages 1-17]
  • Natarajan, B. Influence of current density on refractive index of p-type nanocrystalline porous silicon [Volume 3, Issue 3, 2013, Pages 207-216]
  • Nazari, S. Adsorption of 1-chloro-4-nitrobenzene from aqueous solutions onto single-walled carbon nanotubes [Volume 3, Issue 4, 2013, Pages 263-269]

O

  • Orojlou, H. Effect of temperature and time on morphology of CuO nanoparticle during synthesis [Volume 3, Issue 1, 2012, Pages 69-73]

P

  • Pandiarajan, J. Influence of current density on refractive index of p-type nanocrystalline porous silicon [Volume 3, Issue 3, 2013, Pages 207-216]
  • Parvizi, M. R. Effect of temperature and time on morphology of CuO nanoparticle during synthesis [Volume 3, Issue 1, 2012, Pages 69-73]
  • Patil, B. N. Rapid removal of metals from aqueous solution by magnetic nanoadsorbent: A kinetic study [Volume 3, Issue 4, 2013, Pages 303-312]
  • Pragna, S. Formulation and evaluation of Moxifloxacin hydrochloride ocular nanoparticles [Volume 3, Issue 2, 2012, Pages 105-113]
  • Prithivikumaran, N. Influence of current density on refractive index of p-type nanocrystalline porous silicon [Volume 3, Issue 3, 2013, Pages 207-216]

Q

  • Qomi, M. Ebrahim Effect of Al2O3-water nanofluid on heat transfer and pressure drop in a three-dimensional microchannel [Volume 3, Issue 4, 2013, Pages 281-288]

R

  • Rahimi Aliabad, M. Wavelength and polarization variations of InAs/GaAs quantum dots emission at liquid Helium temperature via microphotoluminescence spectroscopy [Volume 3, Issue 4, 2013, Pages 333-336]
  • Rahimipour, M. R. Synthesis of nanocrystalline BaTiO3 ceramics via hydrothermal condition and structural characterization by HRTEM and SAED [Volume 3, Issue 2, 2012, Pages 163-168]
  • Ramezani, R. Low temperature formation Silver-Copper alloy nanoparticles using hydrogen plasma treatment for fabrication of humidity sensor [Volume 3, Issue 4, 2013, Pages 297-301]
  • Ravinder, S. Strain gradient torsional vibration analysis of micro/nano rods [Volume 3, Issue 1, 2012, Pages 1-17]
  • Rezvani, A. Berry curvature and energy bands of graphene [Volume 3, Issue 4, 2013, Pages 329-332]
  • Riazian, M. Structure of Lattice Strain and effect of sol concentration on the characterization of TiO2-CuO-SiO2 nanoparticles [Volume 3, Issue 2, 2012, Pages 127-139]
  • Riazian, M. Low temperature formation Silver-Copper alloy nanoparticles using hydrogen plasma treatment for fabrication of humidity sensor [Volume 3, Issue 4, 2013, Pages 297-301]
  • Rohit Raj, K. Novel nano cellulosic fibers for remediation of heavy metals from synthetic water [Volume 3, Issue 2, 2012, Pages 155-162]

S

  • Sabbaghi, S. Effect of temperature and time on morphology of CuO nanoparticle during synthesis [Volume 3, Issue 1, 2012, Pages 69-73]
  • Sabbaghi, S. Decreasing of water loss and mud cake thickness by CMC nanoparticles in mud drilling [Volume 3, Issue 2, 2012, Pages 101-104]
  • Sabbaghi, S. Characterization of wax using potential energy and nanocalculation [Volume 3, Issue 3, 2013, Pages 249-253]
  • Saboori, R. Effect of temperature and time on morphology of CuO nanoparticle during synthesis [Volume 3, Issue 1, 2012, Pages 69-73]
  • Saboori, R. Decreasing of water loss and mud cake thickness by CMC nanoparticles in mud drilling [Volume 3, Issue 2, 2012, Pages 101-104]
  • Sadeghi, Babak Synthesis and characterization of Silver-Silica heterogeneous nanocomposite particles by Lithium Aluminum Hydroxide reducing method [Volume 3, Issue 4, 2013, Pages 271-279]
  • Sadr Manuchehri Naeini, Q. The effect of molar ratio on structural and magnetic properties of BaFe12O19 nanoparticles prepared by sol-gel auto-combustion method [Volume 3, Issue 3, 2013, Pages 191-197]
  • Safan, M. A. Compressive strength of Portland cement pastes and mortars containing Cu-Zn nano-ferrite [Volume 3, Issue 2, 2012, Pages 91-100]
  • Safari, M. Effect of polysilicon nanoparticles on enhanced oil recovery in Iranian oil reservoir [Volume 3, Issue 3, 2013, Pages 199-205]
  • Sahooli, M. Effect of temperature and time on morphology of CuO nanoparticle during synthesis [Volume 3, Issue 1, 2012, Pages 69-73]
  • Saranya, R. S. Antimicrobial activity and characterization of biosynthesized silver nanoparticles from Anisochilus carnosus [Volume 3, Issue 4, 2013, Pages 255-262]
  • Savaloni, H. A study on the dependence of DC electrical properties and nanostructure of Cu thin films on film thickness [Volume 3, Issue 3, 2013, Pages 217-226]
  • Sedaghat, S. Synthesis and characterization of Silver-Silica heterogeneous nanocomposite particles by Lithium Aluminum Hydroxide reducing method [Volume 3, Issue 4, 2013, Pages 271-279]
  • Shakibfar, A. Preparation and characterization of a new halo chromate nanoparticle: Triphenylphosphonium trifluoroiodochromate (III)[P(C6H5)3H]+[CrF3I]- [Volume 3, Issue 3, 2013, Pages 227-233]
  • Shakouri, Kh. Effects of on-center impurity on energy levels of low-lying states in concentric double quantum rings [Volume 3, Issue 1, 2012, Pages 43-51]
  • Sheikhzadeh, G. A. Effect of Al2O3-water nanofluid on heat transfer and pressure drop in a three-dimensional microchannel [Volume 3, Issue 4, 2013, Pages 281-288]
  • Shirivastava, V. S. Rapid removal of metals from aqueous solution by magnetic nanoadsorbent: A kinetic study [Volume 3, Issue 4, 2013, Pages 303-312]
  • Shirsath, D. S. Rapid removal of metals from aqueous solution by magnetic nanoadsorbent: A kinetic study [Volume 3, Issue 4, 2013, Pages 303-312]
  • Shobana, M. K. Magnetic study of some nanoferrite materials [Volume 3, Issue 1, 2012, Pages 81-86]
  • Shokohi, M. Wavelength and polarization variations of InAs/GaAs quantum dots emission at liquid Helium temperature via microphotoluminescence spectroscopy [Volume 3, Issue 4, 2013, Pages 333-336]
  • Soltani, A. Decreasing of water loss and mud cake thickness by CMC nanoparticles in mud drilling [Volume 3, Issue 2, 2012, Pages 101-104]
  • Soltanmoradi, A. Synthesis of nanocrystalline BaTiO3 ceramics via hydrothermal condition and structural characterization by HRTEM and SAED [Volume 3, Issue 2, 2012, Pages 163-168]
  • Srinivas, P. Formulation and evaluation of Moxifloxacin hydrochloride ocular nanoparticles [Volume 3, Issue 2, 2012, Pages 105-113]
  • Srivastava, Sh. Novel nano cellulosic fibers for remediation of heavy metals from synthetic water [Volume 3, Issue 2, 2012, Pages 155-162]
  • Suramwar, N. V. Synthesis and catalytic properties of nano CuO prepared by soft chemical method [Volume 3, Issue 1, 2012, Pages 75-80]
  • Syed ali, M. Antimicrobial activity and characterization of biosynthesized silver nanoparticles from Anisochilus carnosus [Volume 3, Issue 4, 2013, Pages 255-262]

T

  • Tafreshi, N. Electrocatalytic determination of free glycerol in biodiesel at nano nickel modified graphite electrode [Volume 3, Issue 3, 2013, Pages 241-247]
  • Tahernejad, M. Synthesis, characterization and optimization of Silica nanostructures by use of structure modifiers and ultrasonication [Volume 3, Issue 1, 2012, Pages 59-67]
  • Talebian Darzi, M. A. Time-dependent analysis of carrier density and potential energy in spherical centered defect InGaAs/AlGaAs quantum dot (SCDQD) [Volume 3, Issue 1, 2012, Pages 35-42]
  • Talebian Darzi, M. A. The effect of first order magnetic field in a GaAs/AlAs spherical quantum dot with hydrogenic impurity [Volume 3, Issue 2, 2012, Pages 149-154]
  • Taleshi, F. Evaluation of catalyst ball-milling process on growth and diameter of carbon nanotubes on iron nanoparticles [Volume 3, Issue 4, 2013, Pages 313-319]
  • Tehrani, R. M. A. Electrocatalytic determination of free glycerol in biodiesel at nano nickel modified graphite electrode [Volume 3, Issue 3, 2013, Pages 241-247]
  • Thakare, S. R. Synthesis and catalytic properties of nano CuO prepared by soft chemical method [Volume 3, Issue 1, 2012, Pages 75-80]

V

  • Vijaya, P. P. Antimicrobial activity and characterization of biosynthesized silver nanoparticles from Anisochilus carnosus [Volume 3, Issue 4, 2013, Pages 255-262]

Y

  • Yogananth, N. Antimicrobial activity and characterization of biosynthesized silver nanoparticles from Anisochilus carnosus [Volume 3, Issue 4, 2013, Pages 255-262]

Z

  • Zaki, El. S. Compressive strength of Portland cement pastes and mortars containing Cu-Zn nano-ferrite [Volume 3, Issue 2, 2012, Pages 91-100]
  • Zhalechin, M. Effect of pH on nanocrystalline Co-ferrite prepared using urea and thiourea fuels by combination of sol-gel auto combustion and ultrasonic irradiation methods [Volume 3, Issue 2, 2012, Pages 141-147]
  • Zobairi, E. D. Construction of Cu2+-selective electrode and thermodynamic study of the ternary aqueous mixed electrolyte system (CuCl2, KCl, H2O) using nanocomposite-based potentiometric sensor [Volume 3, Issue 2, 2012, Pages 115-119]