Author Index

A

  • Abbasi, Z. Enzymatic degradation of Poly (ε-Caprolactone) and Starch blends bontaining SiO2 nanoparticle by Amyloglucosidase and α-Amylase [Volume 5, Issue 6, 2014, Pages 549-555]
  • Abdeen, S. Biosynthesis of Silver nanoparticles from Actinomycetes for therapeutic applications [Volume 5, Issue 2, 2014, Pages 155-162]
  • Abdizadeh, H. Production and microstructural investigation of Al-nano TiB2 composite produced by powder metallurgy technique [Volume 5, Issue 6, 2014, Pages 563-568]
  • Adinehnia, M. Facile and economic method for preparation of nano-colloidal Silica with controlled size and stability [Volume 5, Issue 2, 2014, Pages 177-185]
  • Afshar, A. Alumina nanostructured coating for corrosion protection of 316L stainless steel [Volume 5, Issue 1, 2014, Pages 27-33]
  • Ahmadi, O. Enzymatic degradation of Poly (ε-Caprolactone) and Starch blends bontaining SiO2 nanoparticle by Amyloglucosidase and α-Amylase [Volume 5, Issue 6, 2014, Pages 549-555]
  • Ahmadi, S. Comparison in reduction of solids, turbidity and EC between nanofiltration membrane bioreactor and activated sludge [Volume 5, Issue 1, 2014, Pages 21-26]
  • Alagesan, T. Ex-situ studies on calcinations of structural, optical and morphological properties of post-growth nanoparticles CeO2 by HRTEM and SAED [Volume 5, Issue 4, 2014, Pages 341-349]
  • Alfeel, F. Determination of porous Silicon thermal conductivity using the “Mirage effect” method [Volume 5, Issue 3, 2014, Pages 267-272]
  • Alfeel, F. Change of diffused and scattered light with surface roughness of p-type porous Silicon [Volume 5, Issue 4, 2014, Pages 415-419]
  • Alghoraibi, I. Change of diffused and scattered light with surface roughness of p-type porous Silicon [Volume 5, Issue 4, 2014, Pages 415-419]
  • Ali Moosa, A. Synthesis and purification of Carbon nanotubes [Volume 5, Issue 2, 2014, Pages 97-104]
  • Alizadeh, A. Synthesis and application of modified magnetic nanoparticles for removal of Cyanide from aqueous solutions [Volume 5, Issue 3, 2014, Pages 241-246]
  • Allahbakhsh, Ahmad Synthesis and characterization of Graphene Oxide in suspension and powder forms by chemical exfoliation method [Volume 5, Issue 1, 2014, Pages 11-20]
  • Aminirad, H. Comparison in reduction of solids, turbidity and EC between nanofiltration membrane bioreactor and activated sludge [Volume 5, Issue 1, 2014, Pages 21-26]
  • Anandan, N. Molecular dynamics simulation of a binary mixture lubricant for use in hard disk interfaces [Volume 5, Issue 5, 2014, Pages 453-462]
  • Arabi, H. Applying a suitable route for preparation Fe3O4 nanoparticles by Ammonia and investigation of their physical and different magnetic properties [Volume 5, Issue 3, 2014, Pages 297-303]
  • Archana, D. Galactosylated Albumin nanoparticles bearing Cimetidine for effective management of Acetaminophen induced hepatotoxicity [Volume 5, Issue 5, 2014, Pages 431-440]
  • Asgari, F. Study of quantum size effects and optical characteristics in colloidal Cd1-xSnxTe quantum dotes [Volume 5, Issue 1, 2014, Pages 57-61]
  • Asghari, M. Nano composite PEBAX® membranes: Effect of zeolite X filler on CO2 permeation [Volume 5, Issue 1, 2014, Pages 83-89]
  • Asghari, M. Nano composite PEBAX®/PEG membranes: Effect of MWNT filler on CO2/CH4 separation [Volume 5, Issue 3, 2014, Pages 247-254]
  • Asghari, M. A visible light driven doped TiO2 nanophotocatalyst: Preparation and characterization [Volume 5, Issue 4, 2014, Pages 329-335]
  • Asghari, M. Synthesis and characterization of novel nanocomposite Chitosan membranes for Ethanol dehydration [Volume 5, Issue 5, 2014, Pages 441-446]
  • Asnaashari Eivari, H. Applying a suitable route for preparation Fe3O4 nanoparticles by Ammonia and investigation of their physical and different magnetic properties [Volume 5, Issue 3, 2014, Pages 297-303]
  • Assi, N. Photo catalytic property of ZnO and Mn-ZnO nanoparticles in removal of Cibacet Turquoise blue G from aquatic solution [Volume 5, Issue 2, 2014, Pages 145-154]
  • Assi, N. Synthesis, characterization and investigation photocatalytic degradation of Nitro Phenol with nano ZnO and ZrO2 [Volume 5, Issue 4, 2014, Pages 387-391]
  • Awad, F. Determination of porous Silicon thermal conductivity using the “Mirage effect” method [Volume 5, Issue 3, 2014, Pages 267-272]
  • Awad, F. Change of diffused and scattered light with surface roughness of p-type porous Silicon [Volume 5, Issue 4, 2014, Pages 415-419]
  • Azimi, V. Synthesis of Phthalocyanine derivatives by synergistic effect of catalysts over nanodimensional zeolites under solvent-free conditions [Volume 5, Issue 1, 2014, Pages 35-39]

B

  • Babaei, S. E. Preparation of surface modified magnetic Iron Oxide nanoparticles and study of their colloidal behavior [Volume 5, Issue 3, 2014, Pages 279-284]
  • Babamohammadi, S. Synthesis of a novel polymeric corrosion inhibitor and investigation of its improvement by the addition of a ceramic powder extracted from corn cob [Volume 5, Issue 3, 2014, Pages 223-231]
  • Baghchesara, M. A. Production and microstructural investigation of Al-nano TiB2 composite produced by powder metallurgy technique [Volume 5, Issue 6, 2014, Pages 563-568]
  • Bagheri, Z. Solid state preparation of CdO nano-particles by thermolysis of a precursor as compacted nanosheet [Volume 5, Issue 4, 2014, Pages 409-413]
  • Bahari, A. Degenerate four waves mixing in multilayer nanoshell [Volume 5, Issue 2, 2014, Pages 133-138]
  • Baharvandi, H. R. Production and microstructural investigation of Al-nano TiB2 composite produced by powder metallurgy technique [Volume 5, Issue 6, 2014, Pages 563-568]
  • Bakhtiari, H. Investigation on the structural, morphological and photochemical properties of spin-coated TiO2 and ZnO thin films prepared by sol-gel method [Volume 5, Issue 2, 2014, Pages 113-121]
  • Bakhtiari, H. Photo catalytic property of ZnO and Mn-ZnO nanoparticles in removal of Cibacet Turquoise blue G from aquatic solution [Volume 5, Issue 2, 2014, Pages 145-154]
  • Barati, N. Alumina nanostructured coating for corrosion protection of 316L stainless steel [Volume 5, Issue 1, 2014, Pages 27-33]
  • Barikan, F. Fabrication and magnetic properties of Polyimide/Nickel Oxide nanocomposite [Volume 5, Issue 4, 2014, Pages 365-370]
  • Beena, B. Structural, optical and dielectric studies in ZnO nanorods by microwave assisted method [Volume 5, Issue 5, 2014, Pages 497-503]
  • Beena, B. Synthesis, characterization and antimicrobial properties of CuO nanoparticles against gram-positive and gram-negative bacterial strains [Volume 5, Issue 6, 2014, Pages 519-524]
  • Biparva, P. Two component reaction for the synthesis of Quinolines in the presence of γ-Al2O3 and Cu/ZnO nanoparticles [Volume 5, Issue 5, 2014, Pages 505-509]

C

  • Chakraborty, S. Synthesis and characterization of Lanthanum doped Bismuth Ferrite [Volume 5, Issue 1, 2014, Pages 41-46]
  • Chattergee, Pratik K. Analytical methods for nanomaterial characterization [Volume 5, Issue 4, 2014, Pages 309-320]
  • Chaudhari, N. Synthesis of silver nanoparticles and their antibacterial activity [Volume 5, Issue 6, 2014, Pages 569-573]
  • Cheraghali, R. Adsorption behavior studies of Cerium on modified Mesoporous Aluminosilicate [Volume 5, Issue 2, 2014, Pages 169-175]

D

  • Daneshmand, H. Synthesis and characterization of α-Alumina membrane supports and the binding effect of Poly (Vinyl Alcohol) [Volume 5, Issue 4, 2014, Pages 393-398]
  • Dehno Khalaji, A. A. Tetranuclear Copper (II) schiff base complexes as new precursor for synthesis of CuO nanoparticles by solid-state thermal decomposition [Volume 5, Issue 6, 2014, Pages 583-586]
  • Devi Prasad, B. Chemical synthesis of Zinc Oxide (ZnO) nanoparticles and their antibacterial activity against a clinical isolate Staphylococcus aureus [Volume 5, Issue 4, 2014, Pages 337-340]
  • Devi Prasad, B.S. Silver nanoparticles, a potential alternative to conventional anti-fungal agents to fungal pathogens affecting crop plants [Volume 5, Issue 2, 2014, Pages 139-144]
  • Dhanya, R.P Biosynthesis of Silver nanoparticles from Actinomycetes for therapeutic applications [Volume 5, Issue 2, 2014, Pages 155-162]
  • Dinesh Karthik, A. Synthesis and characterization of Copper and Copper Oxide nanoparticles by thermal decomposition method [Volume 5, Issue 4, 2014, Pages 321-327]
  • Djirsarai, A. Nano composite PEBAX®/PEG membranes: Effect of MWNT filler on CO2/CH4 separation [Volume 5, Issue 3, 2014, Pages 247-254]
  • Doodman, P. Alumina nanostructured coating for corrosion protection of 316L stainless steel [Volume 5, Issue 1, 2014, Pages 27-33]
  • DurgaVijaykarthik, D. Synthesis and characterization of Cadmium Oxide nanoparticles for antimicrobial activity [Volume 5, Issue 6, 2014, Pages 557-562]

E

  • Elsagh, A. Enhanced electrical conductivity properties of Graphene Oxide nanocomposites functionalized with Polyvinyl Alcohol [Volume 5, Issue 5, 2014, Pages 447-451]
  • Esmaeili, J. Increasing flexural strength and toughness of cement mortar using multi-walled Carbon nanotubes [Volume 5, Issue 4, 2014, Pages 399-407]
  • Esmaeilzadeh, A. Two component reaction for the synthesis of Quinolines in the presence of γ-Al2O3 and Cu/ZnO nanoparticles [Volume 5, Issue 5, 2014, Pages 505-509]

F

  • Faghihi-Sani, M. A. Alumina nanostructured coating for corrosion protection of 316L stainless steel [Volume 5, Issue 1, 2014, Pages 27-33]
  • Fallahnejad, M. Comparison in reduction of solids, turbidity and EC between nanofiltration membrane bioreactor and activated sludge [Volume 5, Issue 1, 2014, Pages 21-26]
  • Farhadyar, N. Study of quantum size effects and optical characteristics in colloidal Cd1-xSnxTe quantum dotes [Volume 5, Issue 1, 2014, Pages 57-61]
  • Farhadyar, N. Incorporation of 12-Tungstophosphoric acid in Titania spheres and fabrication of core-shell Polyoxotungstate/Titania nanostructures [Volume 5, Issue 2, 2014, Pages 105-112]
  • Farhadyar, N. Preparation of surface modified magnetic Iron Oxide nanoparticles and study of their colloidal behavior [Volume 5, Issue 3, 2014, Pages 279-284]
  • Farooq Salloom, R. Synthesis and purification of Carbon nanotubes [Volume 5, Issue 2, 2014, Pages 97-104]
  • Feilizadeh, M. A visible light driven doped TiO2 nanophotocatalyst: Preparation and characterization [Volume 5, Issue 4, 2014, Pages 329-335]

G

  • Ganesh, K. Galactosylated Albumin nanoparticles bearing Cimetidine for effective management of Acetaminophen induced hepatotoxicity [Volume 5, Issue 5, 2014, Pages 431-440]
  • Geetha, K. Synthesis and characterization of Copper and Copper Oxide nanoparticles by thermal decomposition method [Volume 5, Issue 4, 2014, Pages 321-327]
  • Geo, S. Biosynthesis of Silver nanoparticles from Actinomycetes for therapeutic applications [Volume 5, Issue 2, 2014, Pages 155-162]
  • Ghafourian, H. Separation of heavy metal Nickel (II) using a new nano adsorbent string GZ-BAKI-TAC-Ni-88 from Ni contaminated Water using beshel tire activated Carbon [Volume 5, Issue 2, 2014, Pages 197-202]
  • Ghammamy, S. Preparation and characterization of CaF2:Ce3+ nanoparticles with spectroscopic studies [Volume 5, Issue 2, 2014, Pages 163-168]
  • Ghammamy, Sh. Synthesis, characterization, of Fluorohydroxyapatite nanopowders by sol-gel processing [Volume 5, Issue 3, 2014, Pages 291-296]
  • Ghammamy, Sh. Synthesis and identification of nanoparticles cobalt (II) bromide by ball mill method [Volume 5, Issue 6, 2014, Pages 533-538]
  • Gharbani, P. Degradation of aqueous solution of 4-Chloro-2-Nitrophenol in nano-TiO2/H2O2 system [Volume 5, Issue 1, 2014, Pages 77-81]
  • Ghasemi, S.E. Numerical analysis of performance of solar parabolic trough collector with Cu-Water nanofluid [Volume 5, Issue 3, 2014, Pages 233-240]
  • Ghofrani, F. Synthesis of a novel polymeric corrosion inhibitor and investigation of its improvement by the addition of a ceramic powder extracted from corn cob [Volume 5, Issue 3, 2014, Pages 223-231]
  • Ghomi Gilvaee, M. Preparation and characterization of CaF2:Ce3+ nanoparticles with spectroscopic studies [Volume 5, Issue 2, 2014, Pages 163-168]
  • Goharshadi, E. A systematic growth of Gold nanoseeds on Silica for Silica@Gold core-shell nanoparticles and investigation of optical properties [Volume 5, Issue 6, 2014, Pages 525-531]
  • Golbabaei Kootenaei, F. Comparison in reduction of solids, turbidity and EC between nanofiltration membrane bioreactor and activated sludge [Volume 5, Issue 1, 2014, Pages 21-26]

H

  • Habibzare, S. Nano composite PEBAX®/PEG membranes: Effect of MWNT filler on CO2/CH4 separation [Volume 5, Issue 3, 2014, Pages 247-254]
  • Harke, S. Synthesis of silver nanoparticles and their antibacterial activity [Volume 5, Issue 6, 2014, Pages 569-573]
  • Hatami, H. Synthesis of nanocrystalline zeolite NaY by hydrothermal method and investigation of its structure and morphology [Volume 5, Issue 1, 2014, Pages 91-95]
  • Hatami, M. Two component reaction for the synthesis of Quinolines in the presence of γ-Al2O3 and Cu/ZnO nanoparticles [Volume 5, Issue 5, 2014, Pages 505-509]
  • Homafar, A. Enzymatic degradation of Poly (ε-Caprolactone) and Starch blends bontaining SiO2 nanoparticle by Amyloglucosidase and α-Amylase [Volume 5, Issue 6, 2014, Pages 549-555]
  • Hooshmand, N. Response surface strategy in the synthesis of Fe3O4 nanoparticles [Volume 5, Issue 5, 2014, Pages 421-430]

I

  • Ibrahim, M. Synthesis and purification of Carbon nanotubes [Volume 5, Issue 2, 2014, Pages 97-104]

J

  • Jeyakumaran, N. Effect of annealing and UV illumination on properties of nanocrystalline ZnO thin films [Volume 5, Issue 5, 2014, Pages 479-487]
  • Jeyakumaran, N. Synthesis and characterization of Cadmium Oxide nanoparticles for antimicrobial activity [Volume 5, Issue 6, 2014, Pages 557-562]

K

  • Kalaee, M. R. Synthesis and characterization of Graphene Oxide in suspension and powder forms by chemical exfoliation method [Volume 5, Issue 1, 2014, Pages 11-20]
  • Karimi, Z. Electronic band structure of a Carbon nanotube superlattice [Volume 5, Issue 1, 2014, Pages 63-67]
  • Kasiralvalad, E. The great potential of nanomaterials in drilling & drilling fluid applications [Volume 5, Issue 5, 2014, Pages 463-471]
  • Keramati Farhoud, M. Photodegradation of reactive red 222 using TiO2 nanostructured thin films prepared by modified sol-gel method [Volume 5, Issue 5, 2014, Pages 489-495]
  • Khadami, R. Synthesis and application of modified magnetic nanoparticles for removal of Cyanide from aqueous solutions [Volume 5, Issue 3, 2014, Pages 241-246]
  • Khakshournia, S.H. Static and modal analysis of parabolic-boundary functionalized Carbon nanotube-reinforced composite plates using FEM [Volume 5, Issue 2, 2014, Pages 187-196]
  • Khalid, P. Analytical methods for nanomaterial characterization [Volume 5, Issue 4, 2014, Pages 309-320]
  • Khalifeh, M. Nanocomposites produced by Ag/TiO2 sol–gel and their structure and spattering and characterization [Volume 5, Issue 3, 2014, Pages 305-308]
  • Khalighyan, N. Response surface strategy in the synthesis of Fe3O4 nanoparticles [Volume 5, Issue 5, 2014, Pages 421-430]
  • Khalili, M. Synthesis and characterization of α-Alumina membrane supports and the binding effect of Poly (Vinyl Alcohol) [Volume 5, Issue 4, 2014, Pages 393-398]
  • Khalkhali, A. Static and modal analysis of parabolic-boundary functionalized Carbon nanotube-reinforced composite plates using FEM [Volume 5, Issue 2, 2014, Pages 187-196]
  • Khanahmadzadeh, S. Fabrication and magnetic properties of Polyimide/Nickel Oxide nanocomposite [Volume 5, Issue 4, 2014, Pages 365-370]
  • Khanbabaei, G. Nano composite PEBAX® membranes: Effect of zeolite X filler on CO2 permeation [Volume 5, Issue 1, 2014, Pages 83-89]
  • Khanlary, M. R. Preparation and characterization of CaF2:Ce3+ nanoparticles with spectroscopic studies [Volume 5, Issue 2, 2014, Pages 163-168]
  • Kharamesh, M. Synthesis of nano-porous molecular sieve from some natural materials [Volume 5, Issue 1, 2014, Pages 69-75]
  • Kirithika, M. Synthesis and characterization of Cadmium Oxide nanoparticles for antimicrobial activity [Volume 5, Issue 6, 2014, Pages 557-562]
  • Kompany, A. A systematic growth of Gold nanoseeds on Silica for Silica@Gold core-shell nanoparticles and investigation of optical properties [Volume 5, Issue 6, 2014, Pages 525-531]
  • Kumaraguruparan, G. Selection of nanofluid for heat transfer applications from existing models of thermal conductivity [Volume 5, Issue 3, 2014, Pages 213-222]

L

  • Lakshmipriya, V. Effect of annealing and UV illumination on properties of nanocrystalline ZnO thin films [Volume 5, Issue 5, 2014, Pages 479-487]

M

  • Mahjoub, A.R. Synthesis, characterization, of Fluorohydroxyapatite nanopowders by sol-gel processing [Volume 5, Issue 3, 2014, Pages 291-296]
  • Mahmoudi, A. Nano composite PEBAX® membranes: Effect of zeolite X filler on CO2 permeation [Volume 5, Issue 1, 2014, Pages 83-89]
  • Malekan, F. Tetranuclear Copper (II) schiff base complexes as new precursor for synthesis of CuO nanoparticles by solid-state thermal decomposition [Volume 5, Issue 6, 2014, Pages 583-586]
  • Maleki, R. Thermal conductivity of Water-based nanofluids: Prediction and comparison of models using machine learning [Volume 5, Issue 1, 2014, Pages 47-55]
  • Malmir, F. Static and modal analysis of parabolic-boundary functionalized Carbon nanotube-reinforced composite plates using FEM [Volume 5, Issue 2, 2014, Pages 187-196]
  • Manchalwad, P. Synthesis of silver nanoparticles and their antibacterial activity [Volume 5, Issue 6, 2014, Pages 569-573]
  • Manuchehri Naeini, Q. S. Photo catalytic property of ZnO and Mn-ZnO nanoparticles in removal of Cibacet Turquoise blue G from aquatic solution [Volume 5, Issue 2, 2014, Pages 145-154]
  • Manuchehri Naeini, Q. S. Synthesis, characterization and investigation photocatalytic degradation of Nitro Phenol with nano ZnO and ZrO2 [Volume 5, Issue 4, 2014, Pages 387-391]
  • Marandi, R. Photodegradation of reactive red 222 using TiO2 nanostructured thin films prepared by modified sol-gel method [Volume 5, Issue 5, 2014, Pages 489-495]
  • Mastali, N. Investigation on the structural, morphological and photochemical properties of spin-coated TiO2 and ZnO thin films prepared by sol-gel method [Volume 5, Issue 2, 2014, Pages 113-121]
  • Mazinani, Saeedeh Synthesis and characterization of Graphene Oxide in suspension and powder forms by chemical exfoliation method [Volume 5, Issue 1, 2014, Pages 11-20]
  • Mehdizadeh Ahangar, GH. R. Numerical analysis of performance of solar parabolic trough collector with Cu-Water nanofluid [Volume 5, Issue 3, 2014, Pages 233-240]
  • Mehrdad Sharif, A. A. Synthesis, characterization and investigation photocatalytic degradation of Nitro Phenol with nano ZnO and ZrO2 [Volume 5, Issue 4, 2014, Pages 387-391]
  • Mehrdad Sharif, A.A. Photo catalytic property of ZnO and Mn-ZnO nanoparticles in removal of Cibacet Turquoise blue G from aquatic solution [Volume 5, Issue 2, 2014, Pages 145-154]
  • Miri, R. Response surface strategy in the synthesis of Fe3O4 nanoparticles [Volume 5, Issue 5, 2014, Pages 421-430]
  • Mirzaee, A. Degradation of aqueous solution of 4-Chloro-2-Nitrophenol in nano-TiO2/H2O2 system [Volume 5, Issue 1, 2014, Pages 77-81]
  • Mohammadjafari, A. R. Increasing flexural strength and toughness of cement mortar using multi-walled Carbon nanotubes [Volume 5, Issue 4, 2014, Pages 399-407]
  • Mohammady, V. The role of the DCCAs in the preparation of crack-free Xerogel [Volume 5, Issue 4, 2014, Pages 351-363]
  • Molahasani, N. Study of quantum size effects and optical characteristics in colloidal Cd1-xSnxTe quantum dotes [Volume 5, Issue 1, 2014, Pages 57-61]
  • Montakhab, N. Facile and economic method for preparation of nano-colloidal Silica with controlled size and stability [Volume 5, Issue 2, 2014, Pages 177-185]
  • Moradi, F. Enzymatic degradation of Poly (ε-Caprolactone) and Starch blends bontaining SiO2 nanoparticle by Amyloglucosidase and α-Amylase [Volume 5, Issue 6, 2014, Pages 549-555]
  • Moradi, V. Enzymatic degradation of Poly (ε-Caprolactone) and Starch blends bontaining SiO2 nanoparticle by Amyloglucosidase and α-Amylase [Volume 5, Issue 6, 2014, Pages 549-555]
  • Moradiyan, A. Effect of metal nanoparticles on hardness in particleboard [Volume 5, Issue 4, 2014, Pages 379-386]
  • Mosallanejad, N. Sonochemical synthesis and characterization of a nano-sized Manganese (II) coordination polymer, [{Mn(NCS)2(4,4´-bipy)(H2O)2}(4,4´-bipy)]n; with 4,4'-Bipyridine (4,4'-bipy) ligand [Volume 5, Issue 3, 2014, Pages 285-289]
  • Mukherjee, S. Synthesis and characterization of Lanthanum doped Bismuth Ferrite [Volume 5, Issue 1, 2014, Pages 41-46]

N

  • Namdari, M. Nano composite PEBAX® membranes: Effect of zeolite X filler on CO2 permeation [Volume 5, Issue 1, 2014, Pages 83-89]
  • Narasimha, G. Silver nanoparticles, a potential alternative to conventional anti-fungal agents to fungal pathogens affecting crop plants [Volume 5, Issue 2, 2014, Pages 139-144]
  • Narasimha, G. Chemical synthesis of Zinc Oxide (ZnO) nanoparticles and their antibacterial activity against a clinical isolate Staphylococcus aureus [Volume 5, Issue 4, 2014, Pages 337-340]
  • Narimani, F. Synthesis of nano-porous molecular sieve from some natural materials [Volume 5, Issue 1, 2014, Pages 69-75]
  • Natarajan, B. Effect of annealing and UV illumination on properties of nanocrystalline ZnO thin films [Volume 5, Issue 5, 2014, Pages 479-487]
  • Negahban Dehcheshmeh, K. Nanocomposites produced by Ag/TiO2 sol–gel and their structure and spattering and characterization [Volume 5, Issue 3, 2014, Pages 305-308]
  • Nematollahi, M. M. Thermal conductivity of Water-based nanofluids: Prediction and comparison of models using machine learning [Volume 5, Issue 1, 2014, Pages 47-55]
  • Nerpagar, T. Synthesis of silver nanoparticles and their antibacterial activity [Volume 5, Issue 6, 2014, Pages 569-573]
  • Nesaraj, A. Samson Chemical precipitation and characterization of multicomponent Perovskite Oxide nanoparticles – possible cathode materials for low temperature solid Oxide fuel cell [Volume 5, Issue 1, 2014, Pages 1-10]

O

  • Oshani, F. Photodegradation of reactive red 222 using TiO2 nanostructured thin films prepared by modified sol-gel method [Volume 5, Issue 5, 2014, Pages 489-495]
  • Otoufi, M. K. A systematic growth of Gold nanoseeds on Silica for Silica@Gold core-shell nanoparticles and investigation of optical properties [Volume 5, Issue 6, 2014, Pages 525-531]

P

  • Pakshir, M. Synthesis of a novel polymeric corrosion inhibitor and investigation of its improvement by the addition of a ceramic powder extracted from corn cob [Volume 5, Issue 3, 2014, Pages 223-231]
  • Papaiah, S. Silver nanoparticles, a potential alternative to conventional anti-fungal agents to fungal pathogens affecting crop plants [Volume 5, Issue 2, 2014, Pages 139-144]
  • Pourheravy, M. Synthesis and identification of nanoparticles cobalt (II) bromide by ball mill method [Volume 5, Issue 6, 2014, Pages 533-538]
  • Pourshamsian, Khalil Comparison in reduction of solids, turbidity and EC between nanofiltration membrane bioreactor and activated sludge [Volume 5, Issue 1, 2014, Pages 21-26]
  • Praseetha, P.K. Biosynthesis of Silver nanoparticles from Actinomycetes for therapeutic applications [Volume 5, Issue 2, 2014, Pages 155-162]
  • Praveen Kumar, B. Chemical synthesis of Zinc Oxide (ZnO) nanoparticles and their antibacterial activity against a clinical isolate Staphylococcus aureus [Volume 5, Issue 4, 2014, Pages 337-340]
  • Preeti, K. Galactosylated Albumin nanoparticles bearing Cimetidine for effective management of Acetaminophen induced hepatotoxicity [Volume 5, Issue 5, 2014, Pages 431-440]
  • Prithivikumaran, N. Effect of annealing and UV illumination on properties of nanocrystalline ZnO thin films [Volume 5, Issue 5, 2014, Pages 479-487]
  • Prithivikumaran, N. Synthesis and characterization of Cadmium Oxide nanoparticles for antimicrobial activity [Volume 5, Issue 6, 2014, Pages 557-562]
  • Purushothaman, K. Molecular dynamics simulation of a binary mixture lubricant for use in hard disk interfaces [Volume 5, Issue 5, 2014, Pages 453-462]

Q

  • Qamar, F. Determination of porous Silicon thermal conductivity using the “Mirage effect” method [Volume 5, Issue 3, 2014, Pages 267-272]
  • Qamar, F. Change of diffused and scattered light with surface roughness of p-type porous Silicon [Volume 5, Issue 4, 2014, Pages 415-419]
  • Qandalee, M. Two component reaction for the synthesis of Quinolines in the presence of γ-Al2O3 and Cu/ZnO nanoparticles [Volume 5, Issue 5, 2014, Pages 505-509]

R

  • Radhakrishnan, A. Structural, optical and dielectric studies in ZnO nanorods by microwave assisted method [Volume 5, Issue 5, 2014, Pages 497-503]
  • Radhakrishnan, A. Synthesis, characterization and antimicrobial properties of CuO nanoparticles against gram-positive and gram-negative bacterial strains [Volume 5, Issue 6, 2014, Pages 519-524]
  • Radhika, Devi Chemical precipitation and characterization of multicomponent Perovskite Oxide nanoparticles – possible cathode materials for low temperature solid Oxide fuel cell [Volume 5, Issue 1, 2014, Pages 1-10]
  • Rahimi Moghadam, F. Degenerate four waves mixing in multilayer nanoshell [Volume 5, Issue 2, 2014, Pages 133-138]
  • Rahmani, Z. Synthesis and identification of nanoparticles cobalt (II) bromide by ball mill method [Volume 5, Issue 6, 2014, Pages 533-538]
  • Rajaei, B. Synthesis and characterization of novel nanocomposite Chitosan membranes for Ethanol dehydration [Volume 5, Issue 5, 2014, Pages 441-446]
  • Ramezani, M. Comparison in reduction of solids, turbidity and EC between nanofiltration membrane bioreactor and activated sludge [Volume 5, Issue 1, 2014, Pages 21-26]
  • Rashidi, A. Facile and economic method for preparation of nano-colloidal Silica with controlled size and stability [Volume 5, Issue 2, 2014, Pages 177-185]
  • Rashidi Ranjbar, Z. Solid state preparation of CdO nano-particles by thermolysis of a precursor as compacted nanosheet [Volume 5, Issue 4, 2014, Pages 409-413]
  • Rashidzadeh, S. Incorporation of 12-Tungstophosphoric acid in Titania spheres and fabrication of core-shell Polyoxotungstate/Titania nanostructures [Volume 5, Issue 2, 2014, Pages 105-112]
  • Rasooli S., H. Effect of asymmetric quantum dot rings in electron transport through a quantum wire [Volume 5, Issue 5, 2014, Pages 473-478]
  • Rasouli, S. Photodegradation of reactive red 222 using TiO2 nanostructured thin films prepared by modified sol-gel method [Volume 5, Issue 5, 2014, Pages 489-495]
  • Razzaghi-Asl, N. Response surface strategy in the synthesis of Fe3O4 nanoparticles [Volume 5, Issue 5, 2014, Pages 421-430]
  • Rejani, P. Structural, optical and dielectric studies in ZnO nanorods by microwave assisted method [Volume 5, Issue 5, 2014, Pages 497-503]
  • Rejani, P. Synthesis, characterization and antimicrobial properties of CuO nanoparticles against gram-positive and gram-negative bacterial strains [Volume 5, Issue 6, 2014, Pages 519-524]
  • Rezaee Nezhad, E. Enzymatic degradation of Poly (ε-Caprolactone) and Starch blends bontaining SiO2 nanoparticle by Amyloglucosidase and α-Amylase [Volume 5, Issue 6, 2014, Pages 549-555]
  • Rezaei, P. Adsorption behavior studies of Cerium on modified Mesoporous Aluminosilicate [Volume 5, Issue 2, 2014, Pages 169-175]
  • Riazian, M. Synthesis and nano structural study on TiO2-NiO-SiO2 composite [Volume 5, Issue 2, 2014, Pages 123-131]

S

  • Saadat, L. Synthesis & study of Polyethylene/Polyaniline/Montmorillonite ductile nano composites properties [Volume 5, Issue 3, 2014, Pages 255-265]
  • Sabbaghi, S. Thermal conductivity of Water-based nanofluids: Prediction and comparison of models using machine learning [Volume 5, Issue 1, 2014, Pages 47-55]
  • Sabbaghi, S. Synthesis and characterization of α-Alumina membrane supports and the binding effect of Poly (Vinyl Alcohol) [Volume 5, Issue 4, 2014, Pages 393-398]
  • Saber Samandari, S. Elastic modulus measurement of polymer matrix nano-composites reinforced by platelet nano-clays [Volume 5, Issue 3, 2014, Pages 273-278]
  • Saber Samandari, S. Finite element modeling of polymer matrix nano-composites reinforced by nano-cylindrical fillers [Volume 5, Issue 4, 2014, Pages 371-377]
  • Saber-Samandari, S. A numerical study on reinforced composites by spherical nano-particles [Volume 5, Issue 6, 2014, Pages 511-517]
  • Sadegh Hassani, S. Facile and economic method for preparation of nano-colloidal Silica with controlled size and stability [Volume 5, Issue 2, 2014, Pages 177-185]
  • Sadegh Hassani, S. An overview of scanning near-field optical microscopy in characterization of nano-materials [Volume 5, Issue 3, 2014, Pages 203-212]
  • Sadeghi, B. Green synthesis of silver nanoparticles using seed aqueous extract of Olea europaea [Volume 5, Issue 6, 2014, Pages 575-581]
  • Sadeghi, M. Synthesis of nanocrystalline zeolite NaY by hydrothermal method and investigation of its structure and morphology [Volume 5, Issue 1, 2014, Pages 91-95]
  • Sadeghvandi, F. Synthesis & study of Polyethylene/Polyaniline/Montmorillonite ductile nano composites properties [Volume 5, Issue 3, 2014, Pages 255-265]
  • Saeb, K. Synthesis and application of modified magnetic nanoparticles for removal of Cyanide from aqueous solutions [Volume 5, Issue 3, 2014, Pages 241-246]
  • Sahooli, M. Thermal conductivity of Water-based nanofluids: Prediction and comparison of models using machine learning [Volume 5, Issue 1, 2014, Pages 47-55]
  • Sambasivam, S. Ex-situ studies on calcinations of structural, optical and morphological properties of post-growth nanoparticles CeO2 by HRTEM and SAED [Volume 5, Issue 4, 2014, Pages 341-349]
  • Sathyaseelan, B. Ex-situ studies on calcinations of structural, optical and morphological properties of post-growth nanoparticles CeO2 by HRTEM and SAED [Volume 5, Issue 4, 2014, Pages 341-349]
  • Sepehrian, H. Adsorption behavior studies of Cerium on modified Mesoporous Aluminosilicate [Volume 5, Issue 2, 2014, Pages 169-175]
  • Seshadri Goud, T.E. Silver nanoparticles, a potential alternative to conventional anti-fungal agents to fungal pathogens affecting crop plants [Volume 5, Issue 2, 2014, Pages 139-144]
  • Seyedsadjadi, M. Study of quantum size effects and optical characteristics in colloidal Cd1-xSnxTe quantum dotes [Volume 5, Issue 1, 2014, Pages 57-61]
  • Seyedsadjadi, M. Incorporation of 12-Tungstophosphoric acid in Titania spheres and fabrication of core-shell Polyoxotungstate/Titania nanostructures [Volume 5, Issue 2, 2014, Pages 105-112]
  • Seyed Sadjadi, M. Preparation of surface modified magnetic Iron Oxide nanoparticles and study of their colloidal behavior [Volume 5, Issue 3, 2014, Pages 279-284]
  • Seyyedi S., S. K. Effect of asymmetric quantum dot rings in electron transport through a quantum wire [Volume 5, Issue 5, 2014, Pages 473-478]
  • Shahtahmasebebi, N. A systematic growth of Gold nanoseeds on Silica for Silica@Gold core-shell nanoparticles and investigation of optical properties [Volume 5, Issue 6, 2014, Pages 525-531]
  • Shameema, S. Analytical methods for nanomaterial characterization [Volume 5, Issue 4, 2014, Pages 309-320]
  • Sharif, Farhad Synthesis and characterization of Graphene Oxide in suspension and powder forms by chemical exfoliation method [Volume 5, Issue 1, 2014, Pages 11-20]
  • Sharifi, S. L. Synthesis of nanocrystalline zeolite NaY by hydrothermal method and investigation of its structure and morphology [Volume 5, Issue 1, 2014, Pages 91-95]
  • Sharifi, Z. Synthesis of a novel polymeric corrosion inhibitor and investigation of its improvement by the addition of a ceramic powder extracted from corn cob [Volume 5, Issue 3, 2014, Pages 223-231]
  • Sheikhshoaie, I. Solid state preparation of CdO nano-particles by thermolysis of a precursor as compacted nanosheet [Volume 5, Issue 4, 2014, Pages 409-413]
  • Shela, R. Pai. Analytical methods for nanomaterial characterization [Volume 5, Issue 4, 2014, Pages 309-320]
  • Shojaeefard, M. H. Static and modal analysis of parabolic-boundary functionalized Carbon nanotube-reinforced composite plates using FEM [Volume 5, Issue 2, 2014, Pages 187-196]
  • Shojaeian, A. Two component reaction for the synthesis of Quinolines in the presence of γ-Al2O3 and Cu/ZnO nanoparticles [Volume 5, Issue 5, 2014, Pages 505-509]
  • Shokri, A. A. Electronic band structure of a Carbon nanotube superlattice [Volume 5, Issue 1, 2014, Pages 63-67]
  • Shokri Aghbolagh, Z. Synthesis, characterization, of Fluorohydroxyapatite nanopowders by sol-gel processing [Volume 5, Issue 3, 2014, Pages 291-296]
  • Sivakumar, K. Ex-situ studies on calcinations of structural, optical and morphological properties of post-growth nanoparticles CeO2 by HRTEM and SAED [Volume 5, Issue 4, 2014, Pages 341-349]
  • Sobat, Z. An overview of scanning near-field optical microscopy in characterization of nano-materials [Volume 5, Issue 3, 2014, Pages 203-212]
  • Sridevi, A. Chemical synthesis of Zinc Oxide (ZnO) nanoparticles and their antibacterial activity against a clinical isolate Staphylococcus aureus [Volume 5, Issue 4, 2014, Pages 337-340]
  • Srinivas, P. Exemestane loaded polymeric nanoparticles for oral delivery [Volume 5, Issue 6, 2014, Pages 539-548]
  • Subramaniyan, A. L. Selection of nanofluid for heat transfer applications from existing models of thermal conductivity [Volume 5, Issue 3, 2014, Pages 213-222]
  • Sukanya, S. Biosynthesis of Silver nanoparticles from Actinomycetes for therapeutic applications [Volume 5, Issue 2, 2014, Pages 155-162]
  • Suman, V.B. Analytical methods for nanomaterial characterization [Volume 5, Issue 4, 2014, Pages 309-320]
  • Sumapriya, T. Exemestane loaded polymeric nanoparticles for oral delivery [Volume 5, Issue 6, 2014, Pages 539-548]

T

  • Taghiyari, H. R. Effect of metal nanoparticles on hardness in particleboard [Volume 5, Issue 4, 2014, Pages 379-386]
  • Tanhaei, M. The role of the DCCAs in the preparation of crack-free Xerogel [Volume 5, Issue 4, 2014, Pages 351-363]
  • Tehranchi, A. Nanocomposites produced by Ag/TiO2 sol–gel and their structure and spattering and characterization [Volume 5, Issue 3, 2014, Pages 305-308]

V

  • Vemana, K. Silver nanoparticles, a potential alternative to conventional anti-fungal agents to fungal pathogens affecting crop plants [Volume 5, Issue 2, 2014, Pages 139-144]
  • Venkatesan, R. Selection of nanofluid for heat transfer applications from existing models of thermal conductivity [Volume 5, Issue 3, 2014, Pages 213-222]
  • Vignesh, A. Selection of nanofluid for heat transfer applications from existing models of thermal conductivity [Volume 5, Issue 3, 2014, Pages 213-222]
  • Vinodini, N. A. Analytical methods for nanomaterial characterization [Volume 5, Issue 4, 2014, Pages 309-320]
  • Vosoughi, M. A visible light driven doped TiO2 nanophotocatalyst: Preparation and characterization [Volume 5, Issue 4, 2014, Pages 329-335]

Y

  • Yahyazadeh, A. Synthesis of Phthalocyanine derivatives by synergistic effect of catalysts over nanodimensional zeolites under solvent-free conditions [Volume 5, Issue 1, 2014, Pages 35-39]

Z

  • Zabihi, S. Effect of asymmetric quantum dot rings in electron transport through a quantum wire [Volume 5, Issue 5, 2014, Pages 473-478]
  • Zakeri, S. M. E. A visible light driven doped TiO2 nanophotocatalyst: Preparation and characterization [Volume 5, Issue 4, 2014, Pages 329-335]
  • Zambare, A. Synthesis of silver nanoparticles and their antibacterial activity [Volume 5, Issue 6, 2014, Pages 569-573]
  • Zare, K. Response surface strategy in the synthesis of Fe3O4 nanoparticles [Volume 5, Issue 5, 2014, Pages 421-430]
  • Zargar, V. Nano composite PEBAX® membranes: Effect of zeolite X filler on CO2 permeation [Volume 5, Issue 1, 2014, Pages 83-89]
  • Zargar, V. Synthesis and characterization of novel nanocomposite Chitosan membranes for Ethanol dehydration [Volume 5, Issue 5, 2014, Pages 441-446]
  • Zargarlellahi, H. Separation of heavy metal Nickel (II) using a new nano adsorbent string GZ-BAKI-TAC-Ni-88 from Ni contaminated Water using beshel tire activated Carbon [Volume 5, Issue 2, 2014, Pages 197-202]
  • Zerafat, M. M. Synthesis and characterization of α-Alumina membrane supports and the binding effect of Poly (Vinyl Alcohol) [Volume 5, Issue 4, 2014, Pages 393-398]