Author Index

A

  • Abband Pashaki, R. Representation of the temperature nano-sensors via cylindrical gate-all-around Si-NW-FET [Volume 6, Issue 4, 2015, Pages 377-383]
  • Abbasi, M. Density functional theory study of the adsorption of NO2 molecule on Nitrogen-doped TiO2 anatase nanoparticles [Volume 6, Issue 1, 2015, Pages 11-17]
  • Abbasi, M. Theoretical computation of the quantum transport of zigzag mono-layer Graphenes with various z-direction widths [Volume 6, Issue 1, 2015, Pages 105-109]
  • Abbasi, M. Study of the flexural sensitivity and resonant frequency of an inclined AFM cantilever with sidewall probe [Volume 6, Issue 4, 2015, Pages 351-362]
  • Abbasi, M. Evaluation of the heat transfer rate increases in retention pools nuclear waste [Volume 6, Issue 4, 2015, Pages 385-398]
  • Afra, E. Producing Cellulose nanofiber from Cotton wastes by electrospinning method [Volume 6, Issue 1, 2015, Pages 1-9]
  • Afshari, S. Density functional theory study of the adsorption of NO2 molecule on Nitrogen-doped TiO2 anatase nanoparticles [Volume 6, Issue 1, 2015, Pages 11-17]
  • Afshari, S. Theoretical computation of the quantum transport of zigzag mono-layer Graphenes with various z-direction widths [Volume 6, Issue 1, 2015, Pages 105-109]
  • Aghabeygi, Sh. Sono-Synthesis and characterization of ZrO2/ZnO nanocomposite, composition effect on enhancing of photocatalytic properties [Volume 6, Issue 3, 2015, Pages 297-304]
  • Aghaeenejad, N. Fabrication and nano structural study on La2O3-Co3O4-ZrO2 composite [Volume 6, Issue 1, 2015, Pages 39-44]
  • Aghayari, R. An experimental investigation of heat transfer of Fe2O3/Water nanofluid in a double pipe heat exchanger [Volume 6, Issue 5, 2015, Pages 517-524]
  • Ahmadi, M. Synthesis and evaluation of bactericidal properties of Ag2O nanoparticles against Aeromonashydrophila [Volume 6, Issue 3, 2015, Pages 263-269]
  • Ahmadi, R. The usage comparison of occupancy parameters, gap band energy, ΔNmax at Xylometazoline medicine ratio its medical conveyer nano [Volume 6, Issue 1, 2015, Pages 19-22]
  • Ahrar, A. J. Investigation of handmade ferrofluids' motion in a ventilated cavity using computational fluid dynamics [Volume 6, Issue 1, 2015, Pages 89-97]
  • Alizadeh, S. Synthesis of Alumina/Polyacrylamide nanocomposite and its influence on viscosity of drilling fluid [Volume 6, Issue 3, 2015, Pages 271-276]
  • Amirtharajan, S. Control capability of electrolytic concentration on refractive index and dielectric constant of porous Silicon layers [Volume 6, Issue 3, 2015, Pages 315-322]
  • Ansari, R. Nonlocal Flügge shell model for the axial buckling of single-walled Carbon nanotubes: An analytical approach [Volume 6, Issue 5, 2015, Pages 453-462]
  • Anuradha, V. Green synthesis of Silver nanoparticle by Acanthus ilicifolius mangrove plant against Armigeressubalbatus and Aedesaegypti mosquito larvae [Volume 6, Issue 2, 2015, Pages 197-204]
  • Arabi, M. Nanosilver and Silver Nitrate induced toxicity in a subacute murine dermal model [Volume 6, Issue 2, 2015, Pages 183-188]
  • Asadi, S. Z. Preparation and characterization of nano-porous Polyacrylonitrile (PAN) membranes with hydrophilic surface [Volume 6, Issue 3, 2015, Pages 217-226]
  • Asghari, M. Effect of nanozeolite 13X on thermal and mechanical properties of Polyurethane nanocomposite thin films [Volume 6, Issue 2, 2015, Pages 177-181]
  • Azimi, H. R. Electrical conductivity of CuO nanofluids [Volume 6, Issue 1, 2015, Pages 77-81]

B

  • Baghbani Arani, J. An experimental investigation of heat transfer of Fe2O3/Water nanofluid in a double pipe heat exchanger [Volume 6, Issue 5, 2015, Pages 517-524]
  • Bagheri Gh., A. Template synthesis and characteristics of nanoparticle MgO [Volume 6, Issue 4, 2015, Pages 439-442]
  • Bahari, A. Fabrication and nano structural study on La2O3-Co3O4-ZrO2 composite [Volume 6, Issue 1, 2015, Pages 39-44]
  • Bahrami Panah, N. Structure and electronic properties of single–walled zigzag BN and B3C2N3 nanotubes using first-principles methods [Volume 6, Issue 2, 2015, Pages 157-165]
  • Bayat, A. Sulfur modified ZnO nanorod as a high performance photocatalyst for degradation of Congoredazo dye [Volume 6, Issue 4, 2015, Pages 425-431]
  • Bhuyan, D. Synthesis and properties of Prussian blue nanoparticles prepared by using Cetyl Pyridinium Chloride as protecting agent [Volume 6, Issue 2, 2015, Pages 129-133]
  • Bigdeli, A. Polypropylene /Polystyrene in situ nano reinforced blends fiber: Morphology and properties [Volume 6, Issue 3, 2015, Pages 305-314]
  • Boroushaki, T. The usage comparison of occupancy parameters, gap band energy, ΔNmax at Xylometazoline medicine ratio its medical conveyer nano [Volume 6, Issue 1, 2015, Pages 19-22]

C

  • Chandra Das, G. Synthesis and properties of Prussian blue nanoparticles prepared by using Cetyl Pyridinium Chloride as protecting agent [Volume 6, Issue 2, 2015, Pages 129-133]
  • Chanthuru, A. Green synthesis of Silver nanoparticle by Acanthus ilicifolius mangrove plant against Armigeressubalbatus and Aedesaegypti mosquito larvae [Volume 6, Issue 2, 2015, Pages 197-204]
  • Cheraghian, G. Effects of nanoparticles on wettability: A review on applications of nanotechnology in the enhanced Oil recovery [Volume 6, Issue 5, 2015, Pages 443-452]

D

  • Dadgar, M. [γ-Fe2O3-HAp-(CH2)3-NHSO3H] nanoparticles as a highly efficient and magnetically separable catalyst for green one-pot synthesis of 4(3H)-Quinazolinones [Volume 6, Issue 5, 2015, Pages 473-478]
  • Dalili Mansour, N. DFT/NBO analysis of interaction between a CNT and anti-cancer drugs [Volume 6, Issue 5, 2015, Pages 479-486]
  • Dashtbani, R. Producing Cellulose nanofiber from Cotton wastes by electrospinning method [Volume 6, Issue 1, 2015, Pages 1-9]
  • Dehno Khalaji, A. A. Synthesis and characterization of nanowires Hausmannite (Mn3O4) by solid-state thermal decomposition [Volume 6, Issue 2, 2015, Pages 153-156]
  • Djavareshkian, M. H. Investigation of handmade ferrofluids' motion in a ventilated cavity using computational fluid dynamics [Volume 6, Issue 1, 2015, Pages 89-97]
  • Domiri Ganji, D. Evaluation of the heat transfer rate increases in retention pools nuclear waste [Volume 6, Issue 4, 2015, Pages 385-398]

E

  • Esmaeili, E. Convective heat transfer enhancement of the Water-based magnetite nanofluids in the presence of a 3-D low-intensity magnetic field [Volume 6, Issue 2, 2015, Pages 141-151]
  • Ezzati, M. The usage comparison of occupancy parameters, gap band energy, ΔNmax at Xylometazoline medicine ratio its medical conveyer nano [Volume 6, Issue 1, 2015, Pages 19-22]

F

  • Falahaty Naghibi, M. Investigation of flow and heat transfer of nanofluid in a diverging sinusoidal channel [Volume 6, Issue 3, 2015, Pages 241-253]
  • Farahbakhsh, A. The obtain optimum production conditions for Glucose Oxidase biosensor using software Qualtek-4 [Volume 6, Issue 1, 2015, Pages 23-30]
  • Farsad, S. Convective heat transfer enhancement of the Water-based magnetite nanofluids in the presence of a 3-D low-intensity magnetic field [Volume 6, Issue 2, 2015, Pages 141-151]
  • Farzi, G. A. Surface modification of ZnO nano-particles with Trimetoxyvinyl Silane and Oleic Acid and studying their dispersion in organic media [Volume 6, Issue 1, 2015, Pages 67-75]
  • Fatemi, S. J. Preparation of Deferasirox in nano-scale by ultrasonic irradiation and optimization the amount and reaction time parameters [Volume 6, Issue 4, 2015, Pages 363-369]

G

  • Ghalbi Ahangari, M. Scanning hall probe microscopy technique for investigation of magnetic properties [Volume 6, Issue 4, 2015, Pages 329-337]
  • Ghamami, Sh. Synthesis and characterization of Nickel (II) Chloride nanoparticles with the study of their thermal behavior [Volume 6, Issue 4, 2015, Pages 401-407]
  • Ghanbari, A. Examining and calculation of non-classical in the solutions to the true elastic cable under concentrated loads in nanofilm [Volume 6, Issue 5, 2015, Pages 463-472]
  • Ghanbari, M. Fabrication and nano structural study on La2O3-Co3O4-ZrO2 composite [Volume 6, Issue 1, 2015, Pages 39-44]
  • Ghazanfari, R. Convective heat transfer enhancement of the Water-based magnetite nanofluids in the presence of a 3-D low-intensity magnetic field [Volume 6, Issue 2, 2015, Pages 141-151]
  • Ghobadi, E. Effect of nanozeolite 13X on thermal and mechanical properties of Polyurethane nanocomposite thin films [Volume 6, Issue 2, 2015, Pages 177-181]
  • Ghoranneviss, M. Conductance of T-shaped Graphene nanodevice with single disorder [Volume 6, Issue 5, 2015, Pages 539-542]
  • Ghorbani, H. R. Evaluation of the effective factors on size and anti-bacterial properties of biosynthesized Silver nanoparticles [Volume 6, Issue 2, 2015, Pages 111-127]

H

  • Hantehzadeh, M. R. Conductance of T-shaped Graphene nanodevice with single disorder [Volume 6, Issue 5, 2015, Pages 539-542]
  • Heidari, M. Estimation of pull-in instability voltage of Euler-Bernoulli micro beam by back propagation artificial neural network [Volume 6, Issue 5, 2015, Pages 487-500]
  • Hemmati, M. Effect of nanozeolite 13X on thermal and mechanical properties of Polyurethane nanocomposite thin films [Volume 6, Issue 2, 2015, Pages 177-181]

I

  • Ilangovan, R. A report on the latest trends in nanofluid research [Volume 6, Issue 3, 2015, Pages 323-328]

J

  • Jafari, A. Conductance of T-shaped Graphene nanodevice with single disorder [Volume 6, Issue 5, 2015, Pages 539-542]
  • Jahanbin Sardroodi, J. Density functional theory study of the adsorption of NO2 molecule on Nitrogen-doped TiO2 anatase nanoparticles [Volume 6, Issue 1, 2015, Pages 11-17]
  • Jahanbin Sardroodi, J. Theoretical computation of the quantum transport of zigzag mono-layer Graphenes with various z-direction widths [Volume 6, Issue 1, 2015, Pages 105-109]
  • Janitabar Darzi, S. Sulfur modified ZnO nanorod as a high performance photocatalyst for degradation of Congoredazo dye [Volume 6, Issue 4, 2015, Pages 425-431]
  • Jeyaprakash, P. Control capability of electrolytic concentration on refractive index and dielectric constant of porous Silicon layers [Volume 6, Issue 3, 2015, Pages 315-322]

K

  • Kalantar, V. Investigation of handmade ferrofluids' motion in a ventilated cavity using computational fluid dynamics [Volume 6, Issue 1, 2015, Pages 89-97]
  • Kamarian, S. Mechanical material characterization of an embedded Carbon nanotube in polymer matrix by employing an equivalent fiber [Volume 6, Issue 2, 2015, Pages 167-175]
  • Karimi, M. Finite difference method for sixth-order derivatives of differential equations in buckling of nanoplates due to coupled surface energy and non-local elasticity theories [Volume 6, Issue 5, 2015, Pages 525-538]
  • Khanbabaei, Gh. Effect of nanozeolite 13X on thermal and mechanical properties of Polyurethane nanocomposite thin films [Volume 6, Issue 2, 2015, Pages 177-181]
  • Khanfekr, A. Convectional hydrothermal synthesis of high-purity pesudo-cubic BaTi0.09Nb0.01O3 nanocrystals in rotary autoclave [Volume 6, Issue 3, 2015, Pages 277-281]
  • Khatamifar, M. Preparation of Deferasirox in nano-scale by ultrasonic irradiation and optimization the amount and reaction time parameters [Volume 6, Issue 4, 2015, Pages 363-369]
  • Khodashenas, B. Evaluation of the effective factors on size and anti-bacterial properties of biosynthesized Silver nanoparticles [Volume 6, Issue 2, 2015, Pages 111-127]
  • Kiani, Gh. Adsorption kinetics and thermodynamics of Malachite Green from aqueous solutions onto expanded Graphite nanosheets [Volume 6, Issue 1, 2015, Pages 55-66]
  • Kiani, S. Scanning hall probe microscopy technique for investigation of magnetic properties [Volume 6, Issue 4, 2015, Pages 329-337]
  • Kordani, N. Yarn pulling out test and numerical solution of penetration into woven fabric target impregnated with shear thickening fluid using SiO2 /Polyethylene Glycol [Volume 6, Issue 4, 2015, Pages 409-416]
  • Kumar Medhi, O. Synthesis and properties of Prussian blue nanoparticles prepared by using Cetyl Pyridinium Chloride as protecting agent [Volume 6, Issue 2, 2015, Pages 129-133]

M

  • Maddah, H. An experimental investigation of heat transfer of Fe2O3/Water nanofluid in a double pipe heat exchanger [Volume 6, Issue 5, 2015, Pages 517-524]
  • Mahboubi, F. DFT/NBO analysis of interaction between a CNT and anti-cancer drugs [Volume 6, Issue 5, 2015, Pages 479-486]
  • Mahjoub, A. Sulfur modified ZnO nanorod as a high performance photocatalyst for degradation of Congoredazo dye [Volume 6, Issue 4, 2015, Pages 425-431]
  • Malekan, F. Synthesis and characterization of nanowires Hausmannite (Mn3O4) by solid-state thermal decomposition [Volume 6, Issue 2, 2015, Pages 153-156]
  • Mazlomifar, A. Adsorption of Methyl orange dye from Water solutions by carboxylate group functionalized multi-walled Carbon nanotubes [Volume 6, Issue 3, 2015, Pages 227-240]
  • Mehdizadeh, A. Scanning hall probe microscopy technique for investigation of magnetic properties [Volume 6, Issue 4, 2015, Pages 329-337]
  • Milani Kalkhorani, N. [γ-Fe2O3-HAp-(CH2)3-NHSO3H] nanoparticles as a highly efficient and magnetically separable catalyst for green one-pot synthesis of 4(3H)-Quinazolinones [Volume 6, Issue 5, 2015, Pages 473-478]
  • Mirjani Kahaki, Z. Template synthesis and characteristics of nanoparticle MgO [Volume 6, Issue 4, 2015, Pages 439-442]
  • Mirzaei, M. MCR of the quenching of the EEM of fluorescence of Aflatoxins (B1, G1) by Gold nanoparticles [Volume 6, Issue 1, 2015, Pages 31-38]
  • Mobini, K. Investigation of flow and heat transfer of nanofluid in a diverging sinusoidal channel [Volume 6, Issue 3, 2015, Pages 241-253]
  • Mohamed Marzook, S. Green synthesis of Silver nanoparticle by Acanthus ilicifolius mangrove plant against Armigeressubalbatus and Aedesaegypti mosquito larvae [Volume 6, Issue 2, 2015, Pages 197-204]
  • Mohammadiun, H. An experimental investigation of heat transfer of Fe2O3/Water nanofluid in a double pipe heat exchanger [Volume 6, Issue 5, 2015, Pages 517-524]
  • Mohammadyari, R. Investigation of flow and heat transfer of nanofluid in a diverging sinusoidal channel [Volume 6, Issue 3, 2015, Pages 241-253]
  • Montazeri, N. Nano Al2O3: An efficient catalyst for the multi-component synthesis of Pyrano [2, 3-d] Pyrimidinone derivatives [Volume 6, Issue 3, 2015, Pages 283-287]
  • Moradi, Gh. Evaluation of uniform delivery of colloidal nano-Silica stabilizer to liquefiable silty sands [Volume 6, Issue 5, 2015, Pages 501-508]
  • Moradi, O. Adsorption of Methyl orange dye from Water solutions by carboxylate group functionalized multi-walled Carbon nanotubes [Volume 6, Issue 3, 2015, Pages 227-240]
  • Motevalli, K. Selecting nanoparticles in the medical industry based upon AHP method [Volume 6, Issue 1, 2015, Pages 45-54]

N

  • Naghibinasab, S. Surface modification of ZnO nano-particles with Trimetoxyvinyl Silane and Oleic Acid and studying their dispersion in organic media [Volume 6, Issue 1, 2015, Pages 67-75]
  • Naghizadeh, R. Convectional hydrothermal synthesis of high-purity pesudo-cubic BaTi0.09Nb0.01O3 nanocrystals in rotary autoclave [Volume 6, Issue 3, 2015, Pages 277-281]
  • Nahrjou, N. DFT/NBO analysis of interaction between a CNT and anti-cancer drugs [Volume 6, Issue 5, 2015, Pages 479-486]
  • Najafi, F. Preparation of AlPO4-5 nano-pore crystals: Effect of alteration in precursor gel preparation on the morphology of crystals [Volume 6, Issue 2, 2015, Pages 205-210]
  • Narayanaraja, T. Biosynthesis of Silver nanoparticles using root extract of the medicinal plant Justicia adhatoda: Characterization, electrochemical behavior and applications [Volume 6, Issue 4, 2015, Pages 339-349]
  • Natarajan, J. Control capability of electrolytic concentration on refractive index and dielectric constant of porous Silicon layers [Volume 6, Issue 3, 2015, Pages 315-322]
  • Natarajan, P. Control capability of electrolytic concentration on refractive index and dielectric constant of porous Silicon layers [Volume 6, Issue 3, 2015, Pages 315-322]
  • Nezakati, A. Statistical analysis of the parameters influencing the mechanical properties of layered MWCNTs/PVC nanocomposites [Volume 6, Issue 5, 2015, Pages 509-516]
  • Nikpanje, E. An experimental investigation of heat transfer of Fe2O3/Water nanofluid in a double pipe heat exchanger [Volume 6, Issue 5, 2015, Pages 517-524]
  • Noorizadeh, H. Simple chemical method for synthesis of CuO/CuI nanocomposite [Volume 6, Issue 2, 2015, Pages 211-216]

O

  • Oveysi Sarabi, A. Examining and calculation of non-classical in the solutions to the true elastic cable under concentrated loads in nanofilm [Volume 6, Issue 5, 2015, Pages 463-472]

P

  • Pandurangan, K. Investigations on structural and electrical properties of Cadmium Zinc Sulfide thin films [Volume 6, Issue 4, 2015, Pages 433-438]
  • Parvaneh, V. Statistical analysis of the parameters influencing the mechanical properties of layered MWCNTs/PVC nanocomposites [Volume 6, Issue 5, 2015, Pages 509-516]
  • Paulsingh, R. EPR studies of Cd substituted Mn Zn nanoferrites [Volume 6, Issue 3, 2015, Pages 255-261]
  • Peiravi, M. M. Evaluation of the heat transfer rate increases in retention pools nuclear waste [Volume 6, Issue 4, 2015, Pages 385-398]
  • Ponvel, K. M. Biosynthesis of Silver nanoparticles using root extract of the medicinal plant Justicia adhatoda: Characterization, electrochemical behavior and applications [Volume 6, Issue 4, 2015, Pages 339-349]
  • Pourahmad, A. Ion exchange growth of Zinc Sulfide quantum dots in aqueous solution [Volume 6, Issue 1, 2015, Pages 83-88]
  • Pourasghar, A. Mechanical material characterization of an embedded Carbon nanotube in polymer matrix by employing an equivalent fiber [Volume 6, Issue 2, 2015, Pages 167-175]
  • Pourshamsian, Kh. ZnO-NPs as an efficient reusable heterogeneous catalyst for synthesis of 1,4-Dihydropyrimidine derivatives in solvent-free conditions [Volume 6, Issue 1, 2015, Pages 99-104]
  • Prabakaran, J. Biosynthesis of Silver nanoparticles using root extract of the medicinal plant Justicia adhatoda: Characterization, electrochemical behavior and applications [Volume 6, Issue 4, 2015, Pages 339-349]

R

  • Rafiee, M. Comparison of metal additives and Boron atom on MgH2 absorbing-desorbing characteristics using calculated NQCCs [Volume 6, Issue 3, 2015, Pages 289-295]
  • Rahimi, K. Preparation and characterization of Graphene/Nickel Oxide nanorods composite [Volume 6, Issue 4, 2015, Pages 371-376]
  • Rahimi-Esbo, M. Investigation of flow and heat transfer of nanofluid in a diverging sinusoidal channel [Volume 6, Issue 3, 2015, Pages 241-253]
  • Rahmani, Z. Synthesis and characterization of Nickel (II) Chloride nanoparticles with the study of their thermal behavior [Volume 6, Issue 4, 2015, Pages 401-407]
  • Rajabi, M. Adsorption of Methyl orange dye from Water solutions by carboxylate group functionalized multi-walled Carbon nanotubes [Volume 6, Issue 3, 2015, Pages 227-240]
  • Rajathilagam, R. Green synthesis of Silver nanoparticle by Acanthus ilicifolius mangrove plant against Armigeressubalbatus and Aedesaegypti mosquito larvae [Volume 6, Issue 2, 2015, Pages 197-204]
  • Ramezani Azghandi, O. The obtain optimum production conditions for Glucose Oxidase biosensor using software Qualtek-4 [Volume 6, Issue 1, 2015, Pages 23-30]
  • Rashidi Ranjbar, Z. Preparation of Deferasirox in nano-scale by ultrasonic irradiation and optimization the amount and reaction time parameters [Volume 6, Issue 4, 2015, Pages 363-369]
  • Rasooli Saghai, H. Gain optimization of the optical waveguide based on the quantum box core/shell structure [Volume 6, Issue 2, 2015, Pages 189-195]
  • Rastkar Ebrahimzadeh, A. Density functional theory study of the adsorption of NO2 molecule on Nitrogen-doped TiO2 anatase nanoparticles [Volume 6, Issue 1, 2015, Pages 11-17]
  • Rastkar Ebrahimzadeh, A. R. Theoretical computation of the quantum transport of zigzag mono-layer Graphenes with various z-direction widths [Volume 6, Issue 1, 2015, Pages 105-109]
  • Riazian, M. Fabrication and nano structural study on La2O3-Co3O4-ZrO2 composite [Volume 6, Issue 1, 2015, Pages 39-44]
  • Rouhi, H. Nonlocal Flügge shell model for the axial buckling of single-walled Carbon nanotubes: An analytical approach [Volume 6, Issue 5, 2015, Pages 453-462]

S

  • Sabbaghi, S. Synthesis of Alumina/Polyacrylamide nanocomposite and its influence on viscosity of drilling fluid [Volume 6, Issue 3, 2015, Pages 271-276]
  • Sadegh Hassani, S. Scanning hall probe microscopy technique for investigation of magnetic properties [Volume 6, Issue 4, 2015, Pages 329-337]
  • Sadeghian Motlagh, S. Preparation of AlPO4-5 nano-pore crystals: Effect of alteration in precursor gel preparation on the morphology of crystals [Volume 6, Issue 2, 2015, Pages 205-210]
  • Sadough Vanini, A. Yarn pulling out test and numerical solution of penetration into woven fabric target impregnated with shear thickening fluid using SiO2 /Polyethylene Glycol [Volume 6, Issue 4, 2015, Pages 409-416]
  • Sagadevan, S. Investigations on structural and electrical properties of Cadmium Zinc Sulfide thin films [Volume 6, Issue 4, 2015, Pages 433-438]
  • Saidi, A. MCR of the quenching of the EEM of fluorescence of Aflatoxins (B1, G1) by Gold nanoparticles [Volume 6, Issue 1, 2015, Pages 31-38]
  • Sedaghat, S. Synthesis, morphological, characterization and evaluation of antibacterial effects of Silver-Polyaniline nanocomposites against Escherichia coli [Volume 6, Issue 2, 2015, Pages 135-140]
  • Sedigh Ziabari, S. A. Representation of the temperature nano-sensors via cylindrical gate-all-around Si-NW-FET [Volume 6, Issue 4, 2015, Pages 377-383]
  • Sen Sarma, N. Synthesis and properties of Prussian blue nanoparticles prepared by using Cetyl Pyridinium Chloride as protecting agent [Volume 6, Issue 2, 2015, Pages 129-133]
  • Seyedi, Sh. Evaluation of uniform delivery of colloidal nano-Silica stabilizer to liquefiable silty sands [Volume 6, Issue 5, 2015, Pages 501-508]
  • Seyyedi Sahbari, S.K. Gain optimization of the optical waveguide based on the quantum box core/shell structure [Volume 6, Issue 2, 2015, Pages 189-195]
  • Shaffiey, S. F. Synthesis and evaluation of bactericidal properties of Ag2O nanoparticles against Aeromonashydrophila [Volume 6, Issue 3, 2015, Pages 263-269]
  • Shaffiey, S. R. Synthesis and evaluation of bactericidal properties of Ag2O nanoparticles against Aeromonashydrophila [Volume 6, Issue 3, 2015, Pages 263-269]
  • Shahidi, A. R. Finite difference method for sixth-order derivatives of differential equations in buckling of nanoplates due to coupled surface energy and non-local elasticity theories [Volume 6, Issue 5, 2015, Pages 525-538]
  • Shariati, M. Statistical analysis of the parameters influencing the mechanical properties of layered MWCNTs/PVC nanocomposites [Volume 6, Issue 5, 2015, Pages 509-516]
  • Shekarian, E. Preparation and characterization of nano-porous Polyacrylonitrile (PAN) membranes with hydrophilic surface [Volume 6, Issue 3, 2015, Pages 217-226]
  • Shojaei, M. Effect of nanozeolite 13X on thermal and mechanical properties of Polyurethane nanocomposite thin films [Volume 6, Issue 2, 2015, Pages 177-181]
  • Sobat, Z. Scanning hall probe microscopy technique for investigation of magnetic properties [Volume 6, Issue 4, 2015, Pages 329-337]
  • Soleymani, M. Synthesis of Alumina/Polyacrylamide nanocomposite and its influence on viscosity of drilling fluid [Volume 6, Issue 3, 2015, Pages 271-276]
  • Srinivas, P. Exemestane loaded polymeric nanoparticles for oral delivery [Volume 6, Issue 4, 2015, Pages 417-424]
  • Subramaniyan, A. L. A report on the latest trends in nanofluid research [Volume 6, Issue 3, 2015, Pages 323-328]
  • Sumapriya, T. Exemestane loaded polymeric nanoparticles for oral delivery [Volume 6, Issue 4, 2015, Pages 417-424]
  • Syed Ali, Mohamed Yacoob Green synthesis of Silver nanoparticle by Acanthus ilicifolius mangrove plant against Armigeressubalbatus and Aedesaegypti mosquito larvae [Volume 6, Issue 2, 2015, Pages 197-204]

T

  • Taheri, R. Electrical conductivity of CuO nanofluids [Volume 6, Issue 1, 2015, Pages 77-81]
  • Tamizifar, M. Convectional hydrothermal synthesis of high-purity pesudo-cubic BaTi0.09Nb0.01O3 nanocrystals in rotary autoclave [Volume 6, Issue 3, 2015, Pages 277-281]
  • Tarighaleslami, A. H. Preparation and characterization of nano-porous Polyacrylonitrile (PAN) membranes with hydrophilic surface [Volume 6, Issue 3, 2015, Pages 217-226]
  • Tayebee, R. Surface modification of ZnO nano-particles with Trimetoxyvinyl Silane and Oleic Acid and studying their dispersion in organic media [Volume 6, Issue 1, 2015, Pages 67-75]
  • Tayebi, H. Polypropylene /Polystyrene in situ nano reinforced blends fiber: Morphology and properties [Volume 6, Issue 3, 2015, Pages 305-314]
  • Tayebi, S. Polypropylene /Polystyrene in situ nano reinforced blends fiber: Morphology and properties [Volume 6, Issue 3, 2015, Pages 305-314]
  • Torabinezhad, A. Polypropylene /Polystyrene in situ nano reinforced blends fiber: Morphology and properties [Volume 6, Issue 3, 2015, Pages 305-314]

V

  • Vaziri, R. Structure and electronic properties of single–walled zigzag BN and B3C2N3 nanotubes using first-principles methods [Volume 6, Issue 2, 2015, Pages 157-165]
  • Venkataraju, C. EPR studies of Cd substituted Mn Zn nanoferrites [Volume 6, Issue 3, 2015, Pages 255-261]

Y

  • Yaghoubi, Z. Selecting nanoparticles in the medical industry based upon AHP method [Volume 6, Issue 1, 2015, Pages 45-54]
  • Yarmohamadi, P. Nanosilver and Silver Nitrate induced toxicity in a subacute murine dermal model [Volume 6, Issue 2, 2015, Pages 183-188]
  • Yazdani, A. Preparation and characterization of Graphene/Nickel Oxide nanorods composite [Volume 6, Issue 4, 2015, Pages 371-376]
  • Yogananth, N. Green synthesis of Silver nanoparticle by Acanthus ilicifolius mangrove plant against Armigeressubalbatus and Aedesaegypti mosquito larvae [Volume 6, Issue 2, 2015, Pages 197-204]

Z

  • Zabihi Agdam, S. Gain optimization of the optical waveguide based on the quantum box core/shell structure [Volume 6, Issue 2, 2015, Pages 189-195]
  • Zahraei, F. Preparation and characterization of Graphene/Nickel Oxide nanorods composite [Volume 6, Issue 4, 2015, Pages 371-376]
  • Zare-Dehnavi, M. Sono-Synthesis and characterization of ZrO2/ZnO nanocomposite, composition effect on enhancing of photocatalytic properties [Volume 6, Issue 3, 2015, Pages 297-304]
  • Zeraatkish, Y. Simple chemical method for synthesis of CuO/CuI nanocomposite [Volume 6, Issue 2, 2015, Pages 211-216]